National park on the doorstep
Kamay Botany Bay National Park and Towra Point Nature Reserve flank the peninsula, holding bushland timber within foraging distance of the village streets, so perimeters run continuously.

Sutherland Shire · AS 3660.1
Termite barriers in Kurnell 2231, a village of houses on the Botany Bay peninsula between Silver Beach, sand dunes and Kamay Botany Bay National Park.
Quick answer
Yes. A new house at Kurnell needs a termite management system under the NCC, installed to AS 3660.1. Collars and the under-slab component go in before concrete, with the perimeter completed during construction. Sutherland Shire certifiers require the installation certificate and durable notice ahead of the Occupation Certificate.
Termite barriers in Kurnell
Kurnell occupies a peninsula reaching into Botany Bay, roughly 17 km south of the city and part of the Sutherland Shire. Kamay Botany Bay National Park covers the eastern side, including the site of the 1770 landing, while Towra Point Nature Reserve lies west. The residential area is a small village of houses set between the bay, the dunes and bushland, so construction here means replacement homes, extensions and secondary dwellings rather than estates. Industrial land holds a bulk fuel import terminal and the desalination plant.
Building on a coastal peninsula brings its own considerations. Sandy ground and nearby bushland support subterranean colonies, and salt air and coastal damp keep timber and sub-floor spaces moist, which accelerates decay in anything left unprotected. Termites reach a new slab through soil and look for the same weak points every time, an unsealed penetration, an untreated edge or a joint to follow upward. Those routes shut only while the slab is still open, so the barrier is priced from the plans and installed to the build program.
Reviewed by Ismail, founder · Sutherland Shire coverage · Updated September 2026 · More Sutherland Shire suburbs
Get my fixed quote
Local conditions
Three Kurnell conditions influence how the barrier is built.
Kamay Botany Bay National Park and Towra Point Nature Reserve flank the peninsula, holding bushland timber within foraging distance of the village streets, so perimeters run continuously.
Loose coastal soils behave differently under a slab edge than clay, and they shift with wind and water. Edge detailing and a clear inspection strip both matter more here as a result.
Salt air keeps sub-floors and cavities damp, which speeds timber decay. Suspended floor framing and pier construction get particular attention where the design includes them.
What we install here
Kurnell work is mainly replacement houses, secondary dwellings and additions in the village, plus occasional commercial slabs on the industrial land. We collar every penetration, install the under-slab component or treated zone specified, and complete the perimeter as the structure rises. Where the design uses piers or a suspended floor, those are protected too. Everything sits in one fixed written quote, staged so a barrier visit never delays the pour or holds up another trade.
Local knowledge
Most residential work is within walking distance of Silver Beach, roughly a kilometre and a half from the centre, with the national park boundary close on the eastern side. Blocks nearest bushland and the dunes get the fullest perimeter treatment. Homes closest to the bay are also the ones where damp conditions show up most, which is why we are careful with sub-floor and pier detailing when the design calls for them.
Sutherland Shire Council certifies building work at Kurnell. Before an Occupation Certificate is granted, the certifier requires evidence that a compliant system is installed: a certificate recording the products, the protected areas and the installing technician, plus a durable notice fixed permanently in the meter box with the installation date and inspection advice. Both are supplied at completion along with product information for the owner.
Kurnell at a glance
| Suburb | Kurnell, NSW 2231 |
|---|---|
| District | Sutherland Shire |
| Distance from Sydney CBD | 16.8 km south |
| Certifying council | Across Sutherland Shire |
| Standard applied | AS 3660.1 termite management systems |
| Installed | Before the slab pour, then staged through the build |
| Documents supplied | Installation certificate and durable notice |
| Typical builds covered | New homes, knockdown rebuilds, granny flats, duplexes, townhouses |
Systems we install
Every photo below is from one of our own Sydney jobs. We look at your slab design, site and budget, then recommend a system or a combination.
01A termite-resistant sheet laid over the whole prepared footprint before concreting, so termites can't come up through the slab anywhere.
02A sealed collar on every pipe, conduit and service that passes through the slab. These gaps are the most common hidden way in.
03Protection at the slab edge and into the wall cavity, which stops termites building hidden tunnels up the outside of the slab.
04An APVMA-registered termiticide zone in the soil, with an optional pipe network under paving so it can be recharged later without digging.
05Barriers for bearers, piers and raised timber floors on sloping or elevated blocks, where there's no slab to protect.
06Detailing for sandstone cuts, block retaining walls, step-downs and cut-and-fill sites, which are common across Sydney.
Why during construction
A retrofit can only treat around a finished house. A pre-construction system protects the parts nobody will ever be able to reach again.
A barrier put in during the build costs a fraction of a post-construction system, and far less than repairing termite damage.
New houses (Class 1) and outbuildings (Class 10) with termite-susceptible framing need a compliant termite management system.
Pipe penetrations and slab joints can only be fully protected while they're still open, before the concrete goes in.
An under-slab system covers ground that no treatment from outside the finished house can ever reach.
Your certifier needs the certificate and durable notice before issuing the Occupation Certificate. We supply both together.
Documented, compliant protection gives buyers, building inspectors and lenders confidence when the home is sold.
Installation stages
A termite barrier isn't a single visit. Each part goes in when the site is ready for it, and we fit around your plumber, concreter and bricklayer.
Send your plans and slab details. We recommend a system and give you one fixed price that covers every stage.
Collars go on every service once the plumber has set out, then the membrane or soil treatment is installed across the prepared site.
Perimeter and cavity protection is fitted as the brickwork or cladding goes up, so there's no unprotected gap at the slab edge.
Where it's specified, the chemical perimeter or reticulation system is completed around the building before paths and gardens go in.
A durable notice goes in the meter box, and the installation certificate goes to your builder and certifier.
The owner gets simple care instructions and an inspection schedule so the system keeps doing its job for years.
Compare systems
Both can meet AS 3660.1. The best choice depends on your slab type, what surrounds the house and how much ongoing upkeep the owner wants.
Physical protection
Entry-point protection
Soil protection
Top-up protection
Most of the Sydney builds we work on use a combination: physical collars on every penetration plus a physical or chemical perimeter.
For builders & developers
Builders, developers and owner-builders get a fixed quote from plans, a technician who turns up when the site is ready, and paperwork that never holds up sign-off.
Consistent pricing across lots, one point of contact and a full document set for every dwelling.
Missing durable notices and unclear install records are a common reason Occupation Certificates get held up. We hand everything over together so your certifier has it all in one go.
Paperwork
A complete document set for the builder, the certifier and every future owner of the property.
A permanent notice in the meter box showing the system, install date, installer, any chemical's life expectancy and inspection advice.
For: certifier, owner, future owners
Written confirmation of the system and products used, the areas protected and our licence details.
For: builder, certifier, owner
Details of the physical system or termiticide installed, including safety data sheets for any chemicals.
For: builder, owner
How to keep the system working, plus the recommended inspection frequency under AS 3660.2.
For: homeowner
From real jobs
Photos from our own Sydney sites, not stock images. Tap any photo to see it larger.
Membrane barrier across a large residential slab
Barrier work on a Sydney Harbour site
Installation through sandstone excavation
Perimeter barrier and sleeves on a new slab
Waffle pod formwork with collared penetrations
Membrane detailed against a retaining wall
Membrane sealed around a column
Protected slab edge with collar in place
Collared penetrations before the pour
Perimeter barrier on a completed slab edge
Pipe penetrations sealed into the membrane
Collars fixed through mesh before concreting
Google reviews
Real, verified reviews from homeowners and businesses we've worked with.
Pricing
Every build is different, so we don't guess. We price from your plans and give you one fixed written quote. Quoting is free.
After handover
A barrier only works while it stays intact and visible. Pass these on to the owner.
Free fixed quote
Tell us about your build and get a clear, fixed price, fast. We usually reply within 30 minutes during business hours.
Get a fixed quote
Kurnell questions
Still unsure? Call and talk it through with a licensed technician.
+61 450 515 215Both can comply, and the decision comes down to the design and how the ground will be finished. Physical collars and a physical perimeter avoid top-ups and suit owners who prefer no chemical component. Where a treated zone is used on loose coastal soils, a reticulation line makes future recharging practical, especially if paving is planned.
Yes. Kamay Botany Bay National Park and the reserve country nearby hold mature timber that supports established colonies, and they forage outward through soil. Blocks near that boundary get a continuous perimeter and detailed junctions at any step-down rather than treatment only on the exposed faces of the slab.
Yes. Piers, bearers and suspended timber floors are covered by the same standard, and they need detailing that a slab-on-ground system does not. We include them in the quote and install so that the protected zone is continuous, with an inspection route that stays accessible after the house is finished.
In most cases, yes. The National Construction Code requires a termite management system for new houses and outbuildings in termite-prone areas where the primary building elements can be damaged by termites. Sydney is termite-prone, so the system is installed to AS 3660.1 and your certifier asks for the installation certificate and durable notice before the Occupation Certificate is issued.
It depends on slab area, perimeter length, the number of pipe penetrations, the system chosen, site complexity and how many visits the build needs. Send us the plans and we return one fixed written quote covering every stage. Quoting is free.
Nearby
Same crew, same staging and the same certifier-ready paperwork, right across the Sutherland Shire.
Service areas
From the Eastern Suburbs and Inner West to the Hills, the Shire and the western growth corridors. Every suburb has its own page with the local ground conditions, the council that certifies the work and the questions builders there ask us.
Slab pour coming up?
Send us your plans today for a fixed quote, or call and talk to a licensed technician about your site.
